Lona Myrick Towing work 2022

Lona Myrick – Towing Assistance from Norfolk, VA to Cape Canaveral in 2022 Lona Myrick recently completed a job transporting a barge from Norfolk, VA to Green Cove Springs, FL.  This job was completed ahead of schedule. Additional service includes assisting with NASA barge Pegasus down in Cape Canaveral, FL. 

Lona Myrick – 1500 HP Pushboat

Lona Myrick - Port Side View

1,500 HP Provided by CAT 3412’s Built 1974 Official Number: 563043 Current COI: 6-6-2022 Gross Tonnage: 166 Length: 66.10’ Breadth: 26’ Depth: 9.6’ – Working Draft of 7.5-8.5’ Eye Level: 31’ Fuel Capacity: 13,800 gallons Potable Water: 6,000 gallons Engine’s: CAT 3412’s with twin Cummins Generator’s Propellers: 4 Blade 68” x 63” Stainless Steel Electronics: […]

TV Grace Myrick Towing and Tug Assistance

Our T/V Grace Myrick with 900 HP measuring 60′ x 22′ x 7′ Pushboat with 30′ eye level. “Grace Myrick” is operating under Certificate of Inspection from the USCG and has all applicable safety gear on board. Meeting all Sub Chapter M requirements this boat is ready for service. and a current COI is ready to assist […]

MOVAX SP-100 VIBRATORY HAMMER

Our Movax SP-100 vibratory hammer is mounted on a CAT 330 hydraulic excavator. We transport it by lowboy directly to your job site and can literally start driving pile within minutes. We have used our Movax to drive 30′-60′ timber pile, 40′-80′ HP14 x 73, aluminum and steel sheet pile, pipe pile, and others. For […]

GENERAL SAYLER SPUD BARGE WITH AMERICAN 7250 CRANE

Myrick Marine’s General Sayler is a spud barge measuring 70’ long, 40’ wide, and 7’ deep. Outfitted with an American 7250 crane on deck, this barge has four spud wells for 18” round spuds each with a range of 68’. Our General Sayler can be used for just about any services requiring a crane on […]

GENERAL PATTON BARGE WITH AMERICAN 999C 110 TON CRANE

Myrick Marine’s General Patton barge is an excellent spud barge with a length of 120’, width of 45’, and height of 7’. We have an American 999C crane on the deck with 140’ of boom. This extensive reach enables us to perform work from the water side of land based projects, as well as to […]

GENERAL EISENHOWER SPUD BARGE WITH LINKBELT LS-318 75 TON CRANE

The General Eisenhower spud barge is 80’ long, 40’ wide, and 7’ deep. She is fitted with four spud wells to accommodate 18” round spuds. We use spuds in the 60-80′ range with 1 and 1/2″ wall depending on the job. Mounted to the deck of this barge is a Linkbelt LS-318 75 ton crane […]

MYRICK 12030

Spud Barge Myrick 12030 is 120′ x 30′ x 7′ with bin walls and 4 each spud wells. Used to haul and store any large or oversize materials as well as transport dirt and rock for various projects. Contact us today if you need oversize materials moved on the water. Previous Next

SPUD BARGE 2060

This barge is 60′ x 20′ x 4′ with four spud wells allows this barge to act as a mooring barge or a speedy transport barge for materials to jobsite and remote locations. Previous Next